Best Anabolic Steroids

Press Enter to search the full catalog.

US Domestic discreet shipping
Third-party batch tested
HPLC & MS verified purity
Trusted Anabolic Manufacturers Only
US Domestic discreet shipping
Third-party batch tested
HPLC & MS verified purity
Trusted Anabolic Manufacturers Only
Back to all products
OmniMass 500 Test Mix - Xeno Laboratories

Xeno Laboratories

OmniMass 500 Test Mix - Xeno Laboratories

Injection · 500 mg/ml · 10 ml

Out of stock
CompoundTestosterone (ester mix)
ClassInjectable androgen mix
Half-lifeMixed, no single value
DetectionUp to 3 months (urine)
Liver toxicityLow
Water retentionModerate to high
One 10 ml vial declaring 500 mg per ml of a testosterone ester mix, 5000 mg of labelled hormone in the bottle. It is aimed at mass blocks, where the calorie surplus is already in place. The ester split is not disclosed, so only the combined strength is quoted as fact, and the water that comes with a high weekly total is managed through the measured estradiol result.
OmniMass 500 Test Mix - Xeno Laboratories
Order Now, Ships Today
Quality First

All products are manufactured under strict quality standards and independently tested before release. By purchasing, the buyer agrees to use these products in compliance with all applicable laws.

Product Overview

OmniMass is Xeno Laboratories' mass-oriented testosterone mix: one 10 ml oil vial declaring 500 mg per millilitre of blended esters. It is built for the part of a cycle where calories are already above maintenance and the goal is raw size, so the practical questions are weekly total, injection rhythm and how much estradiol control the run needs.

As with every multi-ester product, the label discloses the combined strength only. The supplier does not publish how the 500 mg is divided between esters, and no independent assay of this vial is available, so the figures below describe behaviour of a mixed testosterone ester preparation and the general testosterone reference bands rather than a measured breakdown of this bottle.

Why a Mix Suits a Growth Block

Long, steady levels are what a mass block wants. A single long ester supplies that after two or three weeks of loading, but a mix gets there sooner because a short tail in the blend starts releasing immediately, and the long tails then hold the plateau without a mid-week dip between injections.

Everything the hormone does is unchanged by the mix. Testosterone drives protein synthesis and nitrogen retention, supports libido and red blood cell production, and aromatizes into estradiol, which is what brings the water, the appetite and part of the strength that people associate with a bulk. That last part is also the part that needs watching, because a high weekly total with uncontrolled estrogen produces pressure and fluid rather than more muscle.

Dosage Protocol

No approved dose exists for this product. The reference bands are the general testosterone scale, expressed in milligrams per week as the label total rather than by volume.

Beginner 300-400 mg weekly for eight to twelve weeks, given as two shots
Intermediate 400-600 mg weekly, ten to twelve weeks, with estradiol and blood count taken mid-block
Advanced 600-750 mg weekly, twelve to sixteen weeks, reserved for monitored use with blood pressure checks
Female No confirmed protocol; virilization risk applies to any testosterone product
Administration Intramuscular, twice weekly; rotate sites because of the higher concentration

Because a bulk usually runs longer than a cut, the monitoring list is longer here: estradiol, complete blood count, lipids and blood pressure at baseline, mid-block and at the end. Rising hematocrit is the finding that most often forces a break rather than a dose change.

Suggested Protocols

  • Classic mass base. OmniMass at 400-600 mg a week with Nandrolone (Deca and NPP) for joints and size, and an oral kickstart such as Dianabol 20 for the first four weeks.
  • Leaner bulk. Keep the same base and add Primobolan 100 instead of an aromatizing oral, which limits the water carried through the block.
  • Split the week. Two injections of around half the weekly total each keep the peak from the short fraction modest and usually reduce estrogenic side effects.
  • Estrogen by result. Arimidex is added only against a high measured estradiol, never on a fixed schedule.

What to Expect

  • Appetite and fullness first. In a surplus the early changes are appetite, mood and the look of the muscles rather than the scale.
  • Strength by week four. Heavier working weights arrive before visible size, which appears over six to eight weeks.
  • Water and blood pressure. Both reflect the weekly total and the estradiol result, and they show up before lean tissue does.
  • New personal bests with a cost. Longer blocks raise hematocrit and worsen lipids, so progress is measured on the panel as well as the bar.
  • Natural production stops. Recovery is a planned part of the block, not something to arrange later.
  • Nothing without a surplus. The mix amplifies a calorie and protein plan; without one it produces water and little else.

Side Effects and Management

Water retention and higher pressureControl estradiol on measured results and check pressure weekly. Frequent on bulk totals.
GynecomastiaTreat the estrogen finding promptly; do not wait for it to resolve alone.
Hematocrit climbingBlood count at mid-block, hydration, donation where indicated. Common on long runs.
Lipid changesRecheck the panel and keep the surplus moderate rather than extreme.
Acne on back and shouldersDose discipline, skin routine, dermatologist for stubborn cases.
Virilization in womenCome off it the moment the voice or the skin begins to change.

Post-Cycle Therapy

The long esters in the mix carry release for a fortnight after the final shot, so recovery starts after that window closes. A mass block usually ends near the upper edge of cycle length, which means recovery deserves the same planning as the cycle itself.

StartRoughly two weeks after the final shot
Option AOpen tamoxifen at 40 mg a day, drop to 20 mg after two weeks and hold for two to four more
Option BClomiphene at 50 mg a day through a four to six week window
AlwaysSuppression is certain at any effective dose; plan the recovery block in advance
Follow-upOnce therapy ends, wait four to six weeks and repeat total testosterone, LH, FSH, estradiol, blood count and lipids

Buying the Mix

OmniMass is listed in the Xeno Laboratories range beside MegaTest 500 and SuperTest 375, which gives three concentrations of the same hormone to compare. The pages that usually accompany a mass block are Tamox for the recovery end, Equipoise for blood pressure and Nandrolone for deca-style joint support, all within the same brand.

Bulk cycles are the least forgiving place to improvise. A mix at 500 mg per ml makes a large weekly total fit into a small volume, and that convenience is the reason the total can drift upward without the user noticing. Writing the weekly figure down before the block starts, and holding it for the whole run, is a better control than reacting to how a single week feels.

This page is educational and laboratory reference material. Xeno OmniMass is presented as research-grade material supplied for experimental work, not as a drug and not as a treatment for any medical condition. The dosage figures restate published and vendor reference data for testosterone esters rather than a clinical recommendation, and the ester composition of this mix is not disclosed. Nothing here is medical advice. Keep the products away from children and follow local regulations.
What is Xeno OmniMass 500?
A 10 ml oil vial declaring 500 mg per ml of a blended testosterone ester mix, aimed at mass blocks. It is the mass-oriented member of the Xeno testosterone family.
Which esters does the mix contain?
The combined strength is all the label gives. The supplier does not publish the individual ester amounts and no independent assay of this vial appears in the sources, so no per-ester figure is quoted.
How should it be injected?
Twice a week. Splitting the weekly total into two doses limits the peak from the short fraction of the mix and usually softens estrogenic side effects.
What weekly total suits a first mass block?
Around 300-400 mg a week for eight to twelve weeks. Intermediate users run 400-600 mg, and 600-750 mg is the upper band reserved for monitored use.
Why does a bulk cause water retention?
Testosterone aromatizes to estradiol, and estradiol carries fluid and raises blood pressure. The mix does not change that; the weekly total and the measured estradiol result do.
Is an aromatase inhibitor needed?
Only when estradiol actually measures high. A baseline result and a mid-block repeat are what justify adding one, and crushing estrogen on a schedule creates its own problems.
Do I need PCT after OmniMass?
Yes. Any effective dose shuts natural production down, and the recovery block opens roughly two weeks after the final shot, by which point the ester tails have cleared.
Where to buy OmniMass online?
The OmniMass entry in the Xeno Laboratories catalogue shows the 10 ml bottle at 500 mg per ml together with its availability, alongside MegaTest, SuperTest and the post-cycle support pages.

No reviews yet

Be the first to share your experience with OmniMass 500 Test Mix - Xeno Laboratories

Log in to write a review

Complete the protocol

Stack it with

View all →
Added to cart